Wednesday, 15 November 2017
A small selection from IPMS SMW Telford 2017, featuring some models you may not have seen on other Telford galleries out there courtesy John Frackleton (see link below for much more).
Silver medal winner Peter Buckingham from our club - East Kent Scale Modellers - with his almost entirely scratch-built Manx Norton..
Much more posted by John Frackleton on the East Kent Scale Modellers FB page here
Tuesday, 31 October 2017
The brand new Airfix P51D Mustang (1/48th scale) in box review. Wonderful detail, brilliant decals, interesting and unusual marking options and a really good price according to Jason; " top quality throughout.." Watch Jason's video below. First ten minutes cover the decal sheet and instructions..
Bob from East Kent Scale Modeller's (my local club) is currently building this kit - no filler! Here is Bob's build of this kit as seen at the last club meet. Neat cockpit detail from the box, including lap belts slightly proud of the seat. Excellent!
Friday, 6 October 2017
Polish web site build here
Thursday, 5 October 2017
"....anticpation, achievement, art and creative
Starting a new model kit is a great thing. Not only does it mean that you have completed another build to get here, it means that a whole new adventure is beginning. A new world that you control to the very end. How do you want your paint? Camouflage please. It's all about what you want your kit to become. It's a platform for the precious imagination to be employed. Freedom in a cardboard box....."
Great sentiments expressed by the author of the 'Amateur Airplanes' blog. I've been looking forward to building an Eduard Fw 190..and I now have a couple of Eduard's 72nd Fw 190s making their way down the production line, including the A-5 'heavy fighter' boxing above. I have found one or two issues of course...ie, the cockpit etch in the Profi-Pack edition doesn't fit and the gear bay is way too tricky to go together as easily as some make it seem and that wing just snaps in ..not! A very nice and lovely looking kit, but not easy to build- the lack of a positive location for the gear legs in the well may be a deal-breaker for some too! Will keep on flogging it!
the Brassin cockpit set for the Eduard 72nd build - I have used some of the contents on an old Airfix A-8 being converted to an A-5 with some Aeroclub parts - also currently on the bench. Of course with the various Eduard Boxes available there is no longer any need to do this to get an early Fw 190 variant.
Sunday, 9 July 2017
Spitfire IX Revell 32nd scale - build review (7) - finished! PV 270 " AL" Al Deere Biggin Hill wing CO
First 32nd build for this blog and probably not my last - there's no denying the 'impact' and 'presence' of a large scale model. My 72nd scale Fujimi F-4 being built alongside this one seems a little pathetic now. Of course I can see where I have gone awry - Humbrol 30 for the dark green was not a good choice to start with! Camo scheme airbrushed free-hand which in this scale gives a reasonable impression of a hard-edged finish and avoids a heap of masking. Belts from Eduard, codes painted, pilot's seat armour from sheet, flap indicators scratched/ cut out of the wings. As for the kit, well it seems churlish to say anything too bad about it when you get this much plastic for £20. Most of the sprues of course are from the Mk II kit but Revell don't tell you which parts (pilot's head rest etc) to usefully leave out. I kept the head-rest in the end. If you know PV 270 (subject of this build) you will know that it was restored with this in place. The Revell box build pic showing an antenna wire (!) is not the fault of the kit though. I also deployed the flaps down, hence the upper surface indicators (scratched). Yes, yes I know. Not done. Or as Mal on aeroscale put it, " ..It was very rare to see lowered flaps on Spitfires on the ground. They were only used for landing and should be raised as soon as possible, to prevent any damage (apparently pilots would be fined if they didn't!) If the flaps are not lowered then these doors should not be open.." The Spit in my local museum (Manston) is on display in this configuration. Back to the kit - I will say though that I'm not terribly convinced by the dihedral in the wing. Far too 'flat' for me. But I have bought another one along with some Flevo Dutch decals. First three pics taken with my Ipad in fading light. I might try and take some more. My small tribute to a great Kiwi.
Seafire at Duxford, flaps deployed. More elsewhere on this blog here
Sunday, 2 July 2017
Decide to deploy the flaps down (only two positions on the Spitfire, 'up' and 'down') and then realised after the upper surfaces scheme was finished that I'd need to show the 'flap indicators' out. Which involved some drilling and cutting of my nice and freshly painted wing. And unable to find any suitable decals for the sky-coloured codes of my chosen scheme, I thought I'd have a go at masking and painting my own, after all 'A' and 'L' aren't going to be too difficult to mask up and paint, are they ?. My third attempt gave me something I'm more or less happy with ..at least you can do this sort of stuff in 32nd scale..by the way the kit decal codes are hopelessly 'green'..
and, below, gear on. Stance looks OK-ish to me - but I'm not liking the size/shape of those gear doors. Stuck now.
below; my model to be finished as the Brendon Deere's NZ Spitfire IX restoration 'PV 270' in the markings of his uncle WC 'Al' Deere, Biggin Hill Wing, 1943. Avery Little photo here
Thursday, 29 June 2017
practically two whole days in the paint shop (ie garage..). In the end I didn't bother masking the camo scheme and managed to achieve a reasonably 'hard' edge freehand. Note the blue "Washi" tape used for masking. Covers the big areas and is almost Tamiya tape quality ..but much cheaper. Search for it on amazon. Paints are Humbrol enamels suitably 'faded'. FWIW there are a number of bulges on the upper wing surfaces that need filing off and sanding down too for a war-time machine. Good progress today with the fuselage band and yellow ID markings sprayed on. Plenty of scope for things to go wrong yet - the gear legs come in two parts for starters and then I'm planning to do my own decals !
Fnished model is here